Name: ACQ20X20 Airtac Type Pneumatic Compact Air Cylinder Double Acting
Brand: BRANDO
SKU: ACQ
Rating: 4.8 (112 reviews)

Αρχική Σελίδα Προϊόντα Κυλίνδρων με πεπιεσμένο αέρα

ACQ20X20 Airtac Type Pneumatic Compact Air Cylinder Double Acting

Λεπτομέρειες:

Τόπος καταγωγής:	Ningbo, Κίνα
Μάρκα:	BRANDO
Πιστοποίηση:	CE, ISO
Αριθμό μοντέλου:	ACQ

Πληρωμής & Αποστολής Όροι:

Ποσότητα παραγγελίας min:	1 PC
Τιμή:	Negotiation
Συσκευασία λεπτομέρειες:	Εσωτερικό κιβώτιο, χαρτοκιβώτιο, παλέτα
Χρόνος παράδοσης:	4-7 ημέρες εργασίας
Όροι πληρωμής:	L/C, T/T, PayPal, Western Union, MoneyGram
Δυνατότητα προσφοράς:	100000 PC το μήνα

Επικοινωνία

Λεπτομερής Περιγραφή Προϊόντος

Σειρά προϊόντων:	Συμπαγής κύλινδρος ACQ	Άντεξε το μέγεθος (χιλ.):	12, 16, 20, 25, 32, 40, 50, 63, 80, 100
Τυποποιημένο κτύπημα (χιλ.):	5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 75, 80, 90, 100	Να ενεργήσει τύπος:	Διπλής ενέργειας, ενιαίος τύπος ώθησης Acting_, ενιαίος τύπος Acting_Pull
Σειρά λειτουργούσας πίεσης:	0,15 MPA στο MPA 1,0	Πίεση απόδειξης:	1.5 MPA
Υψηλό φως:	Double Compact Cylinder , Airtac Compact Cylinder , Airtac ACQ20X20

ACQ20X20 Airtac Type Pneumatic Compact Air Cylinder Double Acting

A pneumatic cylinder is also called pneumatic actuators is a device that is used in industrial automation applications to provide motion and force. A pneumatic cylinder uses compressed air to create force. This device is widely used in automated systems, machines, and processes. Movement of the products is done directly or indirectly by the pneumatic cylinder and the load will be moved by pushing, pulling, etc. These devices are not costly and can be installed easily. This device can create a huge amount of force over a board range of velocities without overheating or internal damage.

Specifications of ACQ Series Pneumatic Cylinder:

Bore Size (mm)	12	16	20	25	32	40	50	63	80	100
Acting Type	Double Acting
	Single Acting_ Push Type, Single Acting_Pull Type								-
Fluid	Air (to be filtered by 40μm filter element)
Operating Pressure Range	0.15 to 1.0 MPa (1.5 to 10.0 bar) (22 to 145 psi)
Proof Pressure	1.5 MPa (15 bar) (215 psi)
Temprature (℃)	-20 to +70
Speed Range (mm/s)	Double Acting: 30 to 500, Single Acting: 50 to 500
Cushion Type	Bumper
Port Size	M5 x 0.8				1/8''		1/4''		3/8''

Stroke of ACQ Series Pneumatic Cylinder:

ACQ20X20 Airtac Type Pneumatic Compact Air Cylinder Double Acting 0

Symbol of ACQ Series Pneumatic Cylinder:

Ordering Code of ACQ Series Pneumatic Cylinder:
ACQ20X20 Airtac Type Pneumatic Compact Air Cylinder Double Acting 2

Criteria for selection: Cylinder thrust:

Installation & Usage:
1. When load changes in the wonk, the cylinder wih abundant output capacity shall be ed.

2. Relative cylinder wth high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3. Necessasy protection measure shall be taken in the evironment with higher humidity. much dust or water drops, oil dust and welding dregs.

4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5. The medium used by cyinder shall be fitered to 40μm or below.

6. As both of the front cover and piston of the cylinder are short. typically too large stroke can not be ed.

7. Anti-freezing measure shall be adopted under low temperature environment prevent moisture freezing.

8. The cylinder shall avoid the inluence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.

10. C clip Installation:
10.1. Removal & Itallatlon of C clip must be done with proper tool & care.
10.2. Ensure c clip is securely fitted into the proper slot to prevent leakage.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

ετικέτα:

Υπεύθυνος Επικοινωνίας: Brandon

Τηλ.:: +8613454729544